High efficiency filter with partition

SGAF high efficiency filter with partition features:

Professional folding equipment is used for folding, the folds are flat and even, and the workmanship is fine and beautiful;

Special glass fiber filter paper is used as the filter material of the paper separator high efficiency filter, with high filtration efficiency and almost zero secondary pollution;

We use the company’s special aluminum foil or offset paper as spacers to ensure uniform air distribution and wind speed, achieving efficient filtration;

The company has passed ISO9001-2008 certification. Each high-efficiency filter produced is strictly tested in accordance with national standards using professional testing equipment to ensure that the air filter products leaving the factory are 100% qualified.

Paper partition high-efficiency filters are strictly controlled in terms of quality from material selection to production. The HS partition air filters shipped from the factory have the characteristics of low resistance, high efficiency, large dust holding capacity, and high temperature resistance.

General characteristics of paper separator high efficiency filter:

The paper partition high efficiency filter uses a partition design. The corrugated partition can accurately maintain the spacing between the layers. With minimum resistance, the filter material can be used to the maximum extent. The filter material is folded 180 degrees on both sides to form a wedge-shaped pleat. There are two indentations when the filter material is bent, so that it opens into a wedge-shaped box-shaped pleat at the end of the partition. This can prevent the filter material from being damaged. In a corrosive environment, ethylene-plated aluminum partitions can be used to capture 0.3UM particles with an efficiency of 99.99%.

Choose between two sealing structures: gasket type and liquid tank type

MPPS efficiency of laser scanning and counting: 95%. 99.5%, 99.95%, 99.995%

Filter efficiency level: H11, H12, H13, H14 (EN1822)

Paper separator high efficiency filter constituent materials and operating conditions:

Frame material: laminated wood/stainless steel plate/galvanized steel plate/aluminum alloy plate, etc.

Sealant: Polyurethane glue

Separator: offset paper or aluminum foil

Filter material: glass fiber filter paper

Paper separator high efficiency filter application:

Paper partition high efficiency filters are widely used for terminal filtration in civil or industrial clean plants with high cleanliness requirements in electronics factories, semiconductors, precision machinery, pharmaceuticals, hospitals, food and other industries. The replacement cycle of pharmaceutical factories, electronics factories and hospitals is generally 1-2 years, depending on the specific conditions of the site.

Common specifications and technical parameters of paper partition high efficiency filters:

Note: This filter can be customized according to customer’s actual requirements!

Note: For different particle sizes, the efficiency of high-efficiency filters can reach up to 99.999999 or more. It is incorrect to correspond the efficiency level of the filter to the level of the clean room. It is understood that as long as an ultra-high-efficiency filter is used, the cleanliness level of 100 or even 10 can be achieved. In fact, this is a wrong concept. High-efficiency filters are the core of the filtration system, but they are not the only condition to ensure cleanliness. The efficiency of high-efficiency filters meeting the requirements is only one of the necessary conditions and the easiest to achieve. There are many necessary conditions to achieve the corresponding level of the clean room, such as wind speed, ventilation frequency, sealing of doors and windows, clean control of personnel in and out, and many other aspects. Only when all these aspects meet the standards can the cleanliness requirements of the clean room be guaranteed. The filter manufacturer is only responsible for the filter meeting the standards.