Features:

Granular activated carbon is treated with a special chemical formula;

Strong adsorption capacity, high removal efficiency and reliable performance;

Easy to install and maintain, and versatile;

The frame material may be galvanized steel, stainless steel or aluminum alloy;

Specifications

Non-standard customization

Owing to our rich industrial experience, we have been a noted manufacturer of Air Shower to our huge clientele base. It is a specialized enclosed antechambers that is incorporated as entryways of cleanrooms and other controlled environments for reducing particle contamination. Air Shower utilizes high-pressure, HEPA- or ULPA- filtered air for removing fibrous lint, dust and other contaminants from personnel or object surfaces. The effectiveness, unmatched quality, durability and easy installation results in its highly increasing applaud and demands in the market.

designed to provide complete decontamination solutions for various clean room applications. They are ideally installed at the entrance of a clean room or controlled environment chamber to minimize the entry of dust and particulate matters inside the clean room via the clothes and skin surfaces of the personnel. Our Clean Room Air Shower feature programmable operating modes for flexible application and microprocessor based controller for precise supervision of the operating parameters. They use highly efficient pre-filters and HEPA filters for maintaining highly sterile working environments and an integrated fan/blower assembly to provide high velocity air streams for maximum scrubbing action against dust and particulate matters adherent on the exposed skin, clothes and material surfaces.Air is forced by the blower(s) through HEPA filter(s) which are 99.99% efficient against particles of 0.3 microns.Filtered air is ejected through nozzles at high velocities . These turbulent air streams disperse particulate matter on all surfaces.Dispersed particulate matter migrate with the air stream towards the lower areas in the air shower.Air enters the blower supply plenum through pre-filter(s) installed at the base of the air shower. The air is continuously filtered and recirculated. The air shower is a selfcontained device and does not exchange air with the environment it is placed in.

Specifications

Non-standard customization

Structural features:

1. Impact resistance

2. Moisture proof and rust prevention

3, no mildew, no odor

4, easy to clean and maintain

5. Flexible design

6. Rich colors

7. Four laminates are configured. Each laminate bears 150KG

8. Adjustable laminate design facilitates storage of objects

9. Unique buckle design is adopted for laminates and columns

10. Special buckle ensures the safety and reliability of laminates

11, the unique heavy heaven and earth lock easy to use and ensure the safety of items

Stainless steel storage cabinet cleaning and maintenance:

1. Clean and clean the storage cabinets regularly. If store content ark to used have period of time, want to undertake certain to its clear, ability maintains those who occupy the home environment is neat. And in the process that cleans, also undertake cleaning to store content ark, wipe with wet dishcloth store content ark clean, wipe its with dry dishcloth again next, avoid moisture residue, bring about easily store the corrosion of content ark, and also adverse to the thing that deposits. After waiting to wipe clean store content ark, put the goods that store content ark originally again deposit go in.

2. Avoid the contact between storage cabinets and corrosive gases and liquids, and avoid the decay of storage cabinets. Storage cabinets generally have three kinds of iron, wood, and plastic, and for these three materials, very taboo contact with corrosive objects, so to avoid contact with corrosive gases and liquids. Also, avoid moisture residue, which can easily damage storage cabinets.

3, for the cleaning and maintenance of storage cabinets, also want to avoid scratching the surface of storage cabinets. In order to maintain storage cabinets, haikou stainless steel cabinets, to maintain the bright luster of storage cabinets, first of all, to avoid the storage of cabinets to contact with sharp items, and then in the storage of cabinets to clean the selection of cloth is relatively soft cloth, to avoid scraping in the process of wiping to store cabinets.

Specifications

Non-standard customization

The pass thru box is a critical part of the product transfers which occur in every cleanroom. Although simple in design, the
use of a pass box is essential to the maintenance of the high level of cleanliness within the cleanroom. The pass box significantly
limits the amount of outside air exposed to the clean zone. With the use of either a mechanical or electrical interlock system,
the cleanroom is protected from the cross-contamination which would occur if both doors were to open simultaneously.

The pass box is a kind of auxiliary equipment for clean room. It’s used to transfer goods between areas of different clean levels of clean room. It can reduce the times of opening door, prevent the air convection between different areas and minimize the pollution extent.

The pass box is made of stainless steel and is smooth and clean. The two doors are interlocked to effectively prevent cross-contamination. Electronic or mechanical interlocking devices are provided and ultraviolet germicidal lamps are provided.

Specifications

CLEAN BOOTH (also called mobile cleanrooms) is established for the most convenient and fast a simple CLEAN room, CLEAN tents with multiple CLEAN level and dimensional collocation can according to use demand, so its simple design using elastic big easy to install and remove sex and construction short for its main characteristics, CLEAN tent while aiming at the general level of local area of CLEAN room where need high cleanliness do local add to reduce costs. Clean tent is a kind of can offer local high clean environment of air purification equipment.

It can ued alone, also can combination to use. And fabricated 100 level compared to the cleanroom, less investment, quick effect, easy installation, low operating cost. Modular structure and improving cleanliness rating easy, extensible, and repeated use high value. Assembly type structure design, easy installation, shorten delivery cycle. Convenient movement (can pack wanxianglun); Applicable to build a small area of the clean zone. Relative ultra clean bench, internal available and effective space is big; Relative to traditional cleanrooms, low cost, construction of the fast and floor height low is limitless.

Specifications

According to American Federal Standard, a clean room is “a room in which the quantity of particles floating in the air and, when necessary, the temperature, humidity, and pressure, can be controlled, the main objective of the dust in a given room is determined according to the requirements of the products to be handled in the room. 

Materials for Clean shed
(1) Frame: Aluminum profile 40*40/40*80mm used in industry, which is firm, beautiful, rustless and no dust attached; 
(2) Anti-static curtain: The thickness of grid: 0.5mm; Effectively anti-static, great transparent, clear grid, soft, good toughness, no deformation, not getting burnt-in easily and great performance in temperature compartment and, dust and static elimination; 
(3) Covered in the top by purification blind plate, the thickness of which is 1.2mm of plastic spraying cold plate; 
(4) Purification lighting system is used inside of the clean booth; 
(5) Air supply unit FFU: Adopting low noise centrifugal fan, with such features as long service life, low noise, maintenance free, low vibration and adjustable speed. And in the end of FFU is Mini-pleat HEPA Filters, which is low initial resistance, high dust holding capacity, high efficiency, long service life, easy replacement and etc

Specifications

Non-standard customization

Bacclean cleanrooms are necessary for a variety of industries and uses. When a permanent room is cost prohibitive or when you need the ability to remove the room, a soft wall cleanroom is the perfect solution. There are many features included in these portable clean rooms that make them ideal for a number of different circumstances. They are completely self-contained so they can be set up almost anywhere. Set-up is easy and they are available with locking casters so you can move them around as necessary.

Features of the Soft Wall Cleanroom

Soft wall cleanrooms are filled with plenty of features that make them perfect for many types of uses. They are available in a number of standard sizes so there is sure to be a size that will meet your specific needs. The rooms offer the same important features of traditional clean rooms but are much more flexible. They are free-standing so they can be placed almost anywhere. These self-contained units have their own ventilation and lighting systems built in. They utilize HEPA air filters so they can be used in many various situations.

Soft wall cleanrooms have clear vinyl curtains that are 40 ml thick or they can be fitted with soft vinyl strips that alternate between clear and frosted. The units have a 3M proprietary dual lock system for curtain attachment. The standard ceiling height is 8 feet and has vinyl rock ceiling times. The latch connection system lets you disconnect and reconnect them in a variety of configurations.

Specifications

Non-standard customization

  Automatic air purifiter also known as air purification unit,applies to creat a clean air environment of the region of the indoor.

  Mainly combined by fans,HEPA filter,prefilter,air outlet and the cabinet.Adopts three level vibration measures and removable brake casters,small vibration and rasy to move.The undemeath of the self-punification equipped with movable wheel,flexible using,to ensure the wind speed of the working area and always in the ideal state.

Specifications

The biosafety cabinet is used to protect the operator, the laboratory environment, and the experimental materials to prevent exposure to the above operations in order to manipulate infectious materials such as primary cultures, bacterial strains, and diagnostic specimens. Designed for the production of infectious aerosols and spills.

The primary biosafety cabinet protects the staff and the environment without protecting the sample. The airflow principle is the same as for a laboratory fume hood, except that the vent is fitted with a HEPA filter. All types of biosafety cabinets use HEPA filters in the exhaust and air intakes. The first-class biosafety cabinet itself has no fan, and relies on the fan in the external air duct to drive the airflow. Since it cannot provide protection for the test articles or products, it has been used less frequently.

The secondary biosafety cabinet is currently the most widely used cabinet type. Like Class I biosafety cabinets, Class II biosafety cabinets also have airflow into the front window opening, known as the “inlet airflow”, to prevent aerosols that may be generated during microbial operations from escaping from the front window. Unlike Class I biosafety cabinets, the unfiltered intake air stream is captured by the incoming grid before reaching the work area, so the test product is not contaminated by outside air. A unique feature of the Class II biosafety cabinet is that the vertical laminar airflow filtered through the HEPA filter is blown from the top of the safety cabinet and is referred to as the “downward flow.” The sinking airflow is continuously blown through the working area of ​​the safety cabinet to protect the test items in the cabinet from external dust or bacteria.

Specifications

Non-standard customization

A more versatile device. It can usually be placed at the entrance of the clean workshop, or it can be set in the biological laboratory to wash and quickly dry the hands, which can reduce the chance of pollution and have a good effect on improving product quality and yield. It can be widely used in various industrial sectors such as electronics, national defense, precision instruments, instrumentation, pharmaceutical, chemical, agricultural, biological and various scientific laboratories. The self-cleaning device is also called the air self-cleaning unit, and the self-cleaning device shell is made of cold plate spray/stainless steel. The air outlet of the self-cleaning device can reach 100 grades, and the level of the clean bench can reach 1000 cleanliness level (that is, ≥0.5um particles in the air of 1tf3 is about 1000 or so). The lower part of the self-cleaning device is provided with a moving wheel and an adjustable jack. The self-cleaning device is flexible and convenient to use. The self-cleaning device adopts a variable air volume fan system, and multiple gears are selected to ensure that the wind speed of the local working area is always in an ideal state. Self-cleaning devices are widely used in small areas such as electronic factories, biomedicine, sterile rooms, laboratories, pure water, filling water plant filling rooms, beverage plants, food factories, wineries, health products factories, dairy products. Purification.

Specifications

Non-standard customization